Holiday Safety Tips: Decorating, Christmas Trees, Fireplaces

by Categorized: Safety Date:

I’d hate to sound like somebody’s mother, waving my finger and warning about holiday safety precautions. So, instead, let’s turn it over to the state Department of Consumer Protection:

Trees and Decorations
1. Buying a live tree? Check for freshness and keep it watered. A fresh tree is green, its needles are hard to pull from branches, and the needles do not break when bent between your fingers. The bottom of a fresh tree is sticky with resin, and when tapped on the ground, the tree should not lose many needles. Have the seller of the tree cut about 1 inch off the bottom of the trunk before you take it home. Once home, put the tree trunk in a pail of lukewarm water and keep it there until you move it into its tree stand, which should also be full of water.

2. Setting up a tree at home? Place it away from heat sources, such as fireplaces, vents, and radiators. Because heated rooms rapidly dry out live trees, be sure to monitor water levels daily, and keep the tree stand filled with water. Place the tree out of the way of foot traffic, and do not block doorways with the tree.

3. Buying an artificial tree? Look for the label: “Fire Resistant.” Although this label does not mean that the tree will not catch fire, the label does indicate that the tree is more resistant to catching fire.

4. Decorating a tree in a home with small children? Take special care to avoid sharp, weighted, or breakable decorations. Keep trimmings with small removable parts out of the reach of children, who could swallow or inhale small pieces. Avoid trimmings that resemble candy or food that may tempt a child to reach for and swallow them.
1. Keep burning candles within sight. Extinguish all candles before you go to bed, leave the room, or leave the house.
2. Keep candles on a stable, heat-resistant surface. Place candles where kids and pets cannot reach them or knock them over. Lighted candles should be placed away from items that can catch fire, such as trees, other evergreens, decorations, curtains and furniture. Keep them out of drafty areas.
Strings of Lights
1. Use light strings that have been tested. Select lights tested for safety by a nationally recognized testing laboratory, such as Underwriters Laboratories (UL), Intertek (ETL) or the Canadian Standards Association (CSA). Lights for both indoor and outdoor use must meet strict requirements that testing laboratories are able to verify. On decorative lights available in stores, UL’s red holographic label signifies that the product meets safety requirements for indoor and outdoor use. UL’s green holographic label signifies that the product meets requirements for indoor use only.
2. Check each set of lights. Examine new and old lights for broken or cracked sockets, frayed, chewed or bare wires, or loose connections. Throw away damaged sets. It is not worth the risk of fire to use a damaged set of lights. Do not use electric lights on a metallic tree.
3. Check each extension cord. Make sure each extension cord is rated for the intended use and is in good condition. Do not use cords with cuts or signs of pet chewing or fraying.
4. Check outdoor lights for labels. Look for labels indicating that the lights have been certified for outdoor use, and only plug them into a ground-fault circuit interrupter (GFCI)-protected receptacle or a portable GFCI.
1. Use care with “fire salts.” Fire salts produce colored flames when thrown onto wood fires. Fire salts contain heavy metals that can cause intense gastrointestinal irritation and vomiting if swallowed. Keep fire salts away from pets and children.
2. Do not burn wrapping papers in the fireplace. A flash fire may result from burning wrapping papers because ink coatings and paper contents can ignite suddenly and burn intensely.

The Courant is using Facebook comments on stories. To comment on articles, sign into Facebook and enter your comment in the field below. Comments will appear in your Facebook News Feed unless you choose otherwise. To report spam or abuse, click the X next to the comment. For guidelines on commenting, click here.